1. Install termius via playstore apps
2.connect to your vendo machine. vendo machine Portal 10.0.0.1 should be accessible.Make sure ssh is enabled on your vendo machine. Go back to guide.
3 Open termius apps
4. Click the + sign to add device
5. Follow this:
alias:type RPI4, OPI one,OPI PC or kung anong board ang gamit mo
hostname or IP address: 10.0.0.1
port:22
check ssh
username: check the guide
password: check the guide
then press CHECK on top right side
alias:type RPI4, OPI one,OPI PC or kung anong board ang gamit mo
hostname or IP address: 10.0.0.1
port:22
check ssh
username: check the guide
password: check the guide
then press CHECK on top right side
6. A device is generated , click that device to open it.
7. On terminal type your command example sudo nano /etc/resolv.conf
8. When editing file such as resolv.conf, used the 3 dotted line on top right of the phones keyboard to access the arrow left, arrow right, arrrow up ang arrow down. The CTRL key is also beside the 3 dotted line.
To edit, position your cursor at the end of the line using arrow key then press backspace
To save just press CTRL then press O then ENTER
To exit file and return to terminal press CTRL then press X
7. On terminal type your command example sudo nano /etc/resolv.conf
8. When editing file such as resolv.conf, used the 3 dotted line on top right of the phones keyboard to access the arrow left, arrow right, arrrow up ang arrow down. The CTRL key is also beside the 3 dotted line.
To edit, position your cursor at the end of the line using arrow key then press backspace
To save just press CTRL then press O then ENTER
To exit file and return to terminal press CTRL then press X
