Paano Magpalit from USBTOLAN image to VLAN sa LITE version ng 5.1.6

Take note: Sa setup nyo ngayon make sure naka VLAN po kayo. All you need to do is to insert usb to lan sa usb port ng RPI/OPI board then lagyan nyo ng AP in AP mode(disable VLAN doon sa AP) ang USB2LAN nyo. Take note wala kayong gagalawin sa current network setup nyo na naka VLAN.

 1. Una, kung gumagamit kayo ng VLAN setup. Wag nyo nang galawin ang cable connection.Sa halip magdagdag na lang kayo ng USBTOLAN sa USB port ng RPI/OPI board nyo tapos saksakan nyo ng AP na naka AP mode(not router mode and not repeater mode and must be disabled it VLAN functionality kung meron man) tapos isaksak nyo ang bagong image na 5.1.6 na na flash nyo po then boot or power on.

2. Upon reboot login kayo by connecting to AP na nakasaksak doon sa usb to lan. Its portal IP is 10.0.0.1
3. Determine is WAN IP. Take note it.Sample below.

4. Connect ka sa internet source ng RPI/OPI mo or sa ISP modem router kung di ka gumagamit ng VLAN router. Malalaman mo naman yan kung anong router ang nakasulat sa WAN doon mo ikonek ang wifi mo, tapos open ka ng chrome browser at i-type ang WAN IP sa browser para mabuksan ang admin dashboard ng vendo machine. Example kung anong nakita mo sa photos above yun ang itype mo sa browser which is 192.168.3.18 on my part. Sa  setup mo iba din. 

5. Login ka using WAN IP then ang username at password ay parehong admin. Tapos punta ka sa basic network setup palitan ang LAN setup ng VLAN at i set ang LAN IP under check Show more Options, sa 10.0.0.1. Kung mag errror at sinabing gamit na ang 10.0.0.1 na IP sa usb to lan, balik mo muna sa USB TO LAN ang LAN SETUP tapos palitan mo muna sya ng 20.0.0.1 then save tapos reboot mo. Itoy para mabakante ang 10.0.0.1  dahil gagamitin mo sya sa VLAN.

6. Pagkareboot pwede mo nang gawing VLAN ang LAN Setup at i set sa 10.0.0.1 ang LAN IP under check Show more Options then reboot ulit. PAgka reboot naka VLAN ka na,  Pano gawin di ba pinalitan mo na ang usb to lan ng 20.0.0.1 so pagka reboot connect ka sa AP ng usb to lan tapos access mo ang admin dashboard via 20.0.0.1/admin tapos go to BASIC NETWORK SETUP at i switch mo sa VLAN with IP 10.0.0.1. Save and restart. After restart pwede mo nang tanggalin ang usb to lan dahil working na ang VLAN mo.
 
Kung naka business image naman po kayo sa 5.1.6 Final, ang current config nya is naka 10.0.0.1 ang usb to lan, 20.0.0.1 ang builtin wifi at 30.0.0.1 ang vlan22. 

How to configure Single Interface and Multiple Interface in Adopisoft Pisowifi System

 Single interface setup

Multiple interface Setup.
It could be multiple VLAN, multiple USB TO LAN. or multiple LAN port kung maraming builtin-in ethernet port ang ubuntu PC/Mini PC mo and last is combination of VLAN and USB TO LAN.

1. Multiple USB TO LAN

                                         This connection uses 2 USB TO LAN. The eth1 is configured as 10.0.0.1 and the other is 20.0.0.1

Here is the admin configuration:

Go to network then interface then eth1                          Go to network then eth2

    check enable captive portal                                           check enable captive portal 

    set maximum hops allowed to 1                                    set maximum hops allowed to 1

    uncheck dynamic ip address                                         uncheck dynamic ip address

    set static to 10.0.0.1                                                      set static to 20.0.0.1

    set network segment to 20                                            set network segment to 20

    check Use System DNS Server                                    check Use System DNS Server

    Check Enable DHCP Server on this Interface              Check Enable DHCP Server on this Interface

    DHCP Pool Start 10.0.0.10                                           DHCP Pool Start 20.0.0.10

    DHCP Pool End:10.0.15.254                                        DHCP Pool End:20.0.15.254

2. Multiple VLAN only

Here is admin configuration:

Go to Network then VLAN Setup                                        Go to Network then VLAN Setup
    then eth0.22:                                                                             then eth0.23          

    Click create VLAN                                                                      Click create VLAN

    Check Enable Captive Portal                                                     Check Enable Captive Portal

    Set Maximum Hops Allowed to 1                                               Set Maximum Hops Allowed to 1

    Set Parent interface to eth0                                                       Set Parent interface to eth0

    Set VLAN ID/Tag to 22                                                               Set VLAN ID/Tag to 23

    Uncheck Dynamic IP Address                                                    Uncheck Dynamic IP Address  

    Set Static IP Address to 22.0.0.1                                               Set Static IP Address to 23.0.0.1

    Set Network Prefix to 20                                                            Set Network Prefix to 20

    Check Use System DNS Server                                                Check Use System DNS Server

    Check Enable DHCP Server on this Interface                           Check Enable DHCP Server on this Interface

    Set DHCP Pool Start 22.0.0.10                                                 Set DHCP Pool Start 23.0.0.10

    Set DHCP Pool End to 22.0.15.254                                          Set DHCP Pool End to 23.0.15.254

    Click create VLAN                                                                     Click create VLAN

Go to Network then VLAN Setup                                        Go to Network then VLAN Setup
    then eth0.24:                                                                             then eth0.25          

    Click create VLAN                                                                      Click create VLAN

    Check Enable Captive Portal                                                     Check Enable Captive Portal

    Set Maximum Hops Allowed to 1                                               Set Maximum Hops Allowed to 1

    Set Parent interface to eth0                                                       Set Parent interface to eth0

    Set VLAN ID/Tag to 24                                                               Set VLAN ID/Tag to 25

    Uncheck Dynamic IP Address                                                    Uncheck Dynamic IP Address  

    Set Static IP Address to 24.0.0.1                                               Set Static IP Address to 25.0.0.1

    Set Network Prefix to 20                                                            Set Network Prefix to 20

    Check Use System DNS Server                                                Check Use System DNS Server

    Check Enable DHCP Server on this Interface                           Check Enable DHCP Server on this Interface

    Set DHCP Pool Start 24.0.0.10                                                 Set DHCP Pool Start 25.0.0.10

    Set DHCP Pool End to 24.0.15.254                                          Set DHCP Pool End to 25.0.15.254

    Click create VLAN                                                                     Click create VLAN

3. Combination of VLAN and USB TO LAN

4. VLAN directly to AP - No VLAN capable switch/managed switch or no VLAN capable Router

You can still use VLAN if you dont have a VLAN capable router or a VLAN capable switch but have a VLAN capable AP such as TL-EAP110 and TL-EAP225. Remember VLAN on AP's portal must be enabled.

You can also use switch when using VLAN capable AP. But all AP must have VLAN capable or else connecting Access Point(AP) via AP mode on switch will give then free internet because they will be connected directly to ISP.

Bridges (br0,br1,br2...)
Combining2 or more interface into single network and shares single IP subnet.The purpose is to have same portal IP throughout different interfaces. Their individual IP is discarded and uses the subnet of the bridge interface.This may also be used when grouping different network into single network found on the same location base on their purpose and use.
Below is sample of a bridge network where vlan22(eth0.22) and wlan0(Builtin wifi) are bridge together via 10.0.0.1/20 network.

Common misconception:
Wag ka nang mag create ng bridge kung isa lang naman ang member ng bridge.Additional process lang po yan sa system. Mag bridge ka lang kung ang purpose mo is pagsamahin ang 2 or more interface na member sa bridge para iisang IP lang sila. Example sa madalas na bini bridge ay ang builtin wifi na  i-bridge mo sa isa sa mga existing vlan mo para iisang IP network segment/portal sila.

How to Upgrade from Lite to Business without reflashing?

 1. Revoke your LITE license. This is required.Login to your vendor machines admin portal 10.0.0.1/admin then under Device Information, revoke your Lite license.

2. Install Business version via debian file.
Here are the link for different types of Board.

Please update your system by going to System then Devices then paste this link into remote debian file provided box.Dont download .Just copy and paste the link.

For 5.1.3 and above,go to System then Software Updates

For Ubuntu PC

https://github.com/AdoPiSoft/Releases/releases/download/v5.1.5/adopisoft-5.1.5-amd64-node-v16.4.0.deb

For OPI/RPI(armhf) Business:

https://github.com/AdoPiSoft/Releases/releases/download/v5.1.5/adopisoft-5.1.5-armhf-node-v16.4.0.deb

For OPI/RPI Lite(armhf lite)

https://github.com/AdoPiSoft/Releases/releases/download/v5.1.5/adopisoft-5.1.5-lite-armhf-node-v16.4.0.deb

For arm64 board(Nanopi R2S) Business

https://github.com/AdoPiSoft/Releases/releases/download/v5.1.5/adopisoft-5.1.5-arm64-node-v16.4.0.deb

For arm64 board INanopi R2s) LITE

https://github.com/AdoPiSoft/Releases/releases/download/v5.1.5/adopisoft-5.1.5-lite-arm64-node-v16.4.0.deb

3. Hard restart the machine.After restart , activate the new business license.
There are 2 kinds of Business license:

AdoPiSoft Business (Lifetime) - Php 3,150

Unlimited users

Unlimited Sub Vendos

Full Features

AdoPiSoft Business 1 Year Subscription - Php 499

Unlimited users

Unlimited Sub Vendos

Full Features

To avail, go to here: https://www.adopisoft.com/activation

Using Termius to connect to your device via SSH

 1. Install termius via playstore apps
2.connect to your vendo machine. vendo machine Portal 10.0.0.1 should be accessible.Make sure ssh is enabled on your vendo machine. Go back to guide.
3 Open termius apps

4. Click the + sign to add device

5. Follow this:
alias:type RPI4, OPI one,OPI PC or kung anong board ang gamit mo
hostname or IP address: 10.0.0.1
port:22
check ssh
username: check the guide
password: check the guide
then press CHECK on top right side

6. A device is generated , click that device to open it. 
7. On terminal type your command example sudo nano /etc/resolv.conf
8. When editing file such as resolv.conf, used the 3 dotted line on top right of the phones keyboard to access the arrow left, arrow right, arrrow up ang arrow down. The CTRL key is also beside the 3 dotted line.
To edit, position your cursor at the end of the line using arrow key then press backspace
To save just press CTRL then press O then ENTER
To exit file and return to terminal press  CTRL then press X

Safeguarding Your Adopisoft Account: Essential Security Tips

 Here at AdoPiSoft, we take the security of your accounts very seriously. To ensure the continued safe operation of your vending machines and manager accounts, we kindly ask you to follow these important security practices:

1. Unique Passwords:

Never use the same password for your Adopisoft manager account, vending machine credentials, and email address. This creates a single point of failure; if one password is compromised, both accounts are at risk.

Create strong, unique passwords for both accounts. A strong password should be at least 12 characters long and include a combination of uppercase and lowercase letters, numbers, and symbols.

These are the 3 accounts for managing adopisoft:

I. The adopisoft manager account, accessible through http://manager.adopisoft.com, acts as the central hub for managing your wifi vendo business. Here, you can create and manage user accounts, monitor sales reports, and manage machines and licenses,sub-vendo credit, and ECASH payments.

II. For individual machine control, you can access each vendo machine's local web interface through a web browser at http://10.0.0.1/admin on your local network. This interface allows you to view real-time machine status, adjust local settings, and potentially troubleshoot any connectivity issues.

III. Finally, a separate email account, accessed through your preferred email provider's webmail interface or email client, is crucial for receiving important notifications from AdoPiSoft. This could include system updates, account verification messages, license activation, revoke and license transfer, or even critical alerts about your vendo machines. Remember, the specific server details for accessing your email will depend on the email provider you use (e.g., Gmail- https://mail.google.com/mail/, Yahoo Mail - https://mail.yahoo.com/, etc.).

By effectively utilizing these three accounts, you can maintain control over your wifi vendo business, ensuring smooth operation and maximizing your profits.

2. Secure Login Practices:

Always log out of your AdoPiSoft manager account after each session or use incognito mode(CTRL+SHIFT+N in Chrome). This is especially important if you are using a public computer or a shared device.

Do not share your login credentials with anyone. This includes employees, colleagues, or anyone else.

Enable two-factor authentication (2FA) for your email account. This adds an extra layer of security by requiring a second verification code in addition to your password when logging in.

3. Public and Shared Devices:

Avoid logging in to your AdoPiSoft manager account on public computers or shared devices. If absolutely necessary, ensure you log out completely and clear your browsing history before leaving the device.

By following these simple security practices, you can help to protect your AdoPiSoft accounts and vending machines from unauthorized access.

Additional Tips:

Be cautious about clicking on suspicious links or downloading attachments from unknown senders. Phishing scams can attempt to steal your login credentials.

If you believe your password has been compromised, change it immediately for both your Adopisoft manager account and your email address.

Securing your account is a collaborative effort between you and Adopisoft. We are committed to providing a secure platform, but your active participation is crucial in safeguarding your information. By following these security best practices, you not only protect your data but also contribute to the overall security of the Adopisoft community.

Together, we can create a stronger and more secure environment for everyone.

By following these simple security practices, you can significantly reduce the risk of unauthorized access to your Adopisoft account and protect your valuable data.

If you have any questions or require further assistance with securing your accounts, please don't hesitate to contact Adopisoft support.

Thank you for your cooperation in maintaining a secure environment for everyone using Adopisoft.

Adopisoft Subvendo Credits

 Kung walang subvendo credit, lahat ng coinslot sa lahat ng interface ay makikita during insert coins, Kung may naka assign na subvendo credit naman kung ilang subvendo na may subvendo credit ang nasa isang interface, yun din lang ang makikita during insert coin, kung isa lang  automatic auto select coinslot.Yung walang credit sa specific interface na iyon ay di mo makikita at di mo na magagamit ang subvendo dahil hinaluan mo na ng may credit.

What is subvendo credit?
ang subvendo credit ay para sa mga existing coinslot na gustong maging auto select coinslot ang mga subvendo.

ang auto select coinslot ay magwowork lang kung naka separate interface ang bawat subvendo

ang subvendo ay free at magagamit mo yan kaagad kung tama ang setup and configration.

ang subvendo credit ay hindi license

ang auto select coinslot ay magwowork lang kung naka separate interface ang bawat subvendo at merong subvendo credit ang bawat subvendo sa bawat interface.

Advanced Sub Vendo Capabilities:

1. auto select coin slot if one coin slot is assigned in every interface

2. capability to have different rates in every sub vendo

3. Sub vendo credit is P399 for additional sub vendo with separate rates from the free basic version. You need to separate the sub vendo interface before you activate the advanced sub vendo on that separate interface or else you might need to buy sub vendo credits to all of your available coinslot whether its main or sub.

If your having 2 or more coinslot using the 10.0.0.1 interface, you need to buy credits to all of your availalbe coinslot or else you cannot use the rest of the coinslot whether its main os sub in that interface without assigning sub vendo credit to it

Please separate the interface and assign sub vendo credit to that interface so that your main interface is still free to use without needing a sub vendo credits

Example of Using subvendo credit:

Ex vlan22 10.0.0.1

       Subvendo Coinslot A

       Subvendo Coinslot B

     usb to lan 20.0.0.1

       subvendo coinslot C

     usb to LAN 30.0.0.1

        subvendo coinslot D

     vlan23 40.0.0.1

        subvendo coinslot E

        subvendo coinslot F

Scenario1: wala kang sub vendo credit.During insert coin lahat ng coinslot lalabas from A to F

Scenario2: may sub vendo credit ka at naka activated sa C

           Kapag sa ABDEF ka naka connect , lalabas lahat ng coinslot ABDEF except C.

           Kapag sa C ka naka connect C lang ang lalabas.

Scenario3: may sub vendo credit ka at sa coinslot E lang naka activate

           Kapag sa ABCD ka naka connect, lalabas ang coinslot ABCD.

           Kapag sa E ka naka connect, E lang ang lalabas. Yung F ay madidisable at hindi mo magagamit hanggat hindi mo linalagyan ng sub vendo credit

scenario 4 : Kapag may sub vendo credit ka at naka activate sa E at sa F, kapag kokonek sa sa ABCD, ABCD lang ang lalabas. Kapag sa E at F ka kokonek, E at F lang ang lalabas.

https://www.youtube.com/watch?v=ujP1PEORMRo&t=23s

https://www.youtube.com/watch?v=vdTa-Mr8glE&pp=ygURYWR2YW5jZWQgc3VidmVuZG8%3D

Sample of your Subvendo list na naka install sa ibat ibang interface at pwedeng bilhan ng subvendo credit para maging auto select:

Sample Pre-requisite Network Topology to use Auto Select coinslot feature:

Auto Select Coinslot Network Topology (Enlarge It)

Configuring Network Setup of Adopisoft

 Here are possible scenarios that you can configure assuming 1 USB to LAN, 1 VLAN ID 22
1.separate network:
   USB To LAN-10.0.0.1 assuming your USB to LAN is eth1
   VLAN ID 22- 20.0.0.1
   if USB TO LAN is the main interface
or

USB to LAN - 20.0.0.1 assuming your USB to LAN is eth1
VLAN ID 22- 10.0.0.1
if VLAN ID 22 is the main interface

2.Combined network using bridge-Network bridging is a process of connecting multiple communication networks or network segments into a single, unified network.It's achieved using a network bridge, a hardware device that filters and forwards data packets based on their Media Access Control (MAC) addresses.In short 2 or more multiple network will use and joined into single network/IP.Their individual IP will be discarded.

VLAN ID 22-22.0.0.1
USB to LAN- 20.0.0.1
Bridge(br0)-10.0.0.1  is the main interface resulting from combining USB to LAN and VLAN ID 22







Let's configure the separate network where USB to LAN is the main interface:

Go to network then interface then eth1

    check enable captive portal

    set maximum hops allowed to 1

    uncheck dynamic ip address

    set static to 10.0.0.1

    set network segment to 20

    check Use System DNS Server

    Check Enable DHCP Server on this Interface

    DHCP Pool Start 10.0.0.10

    DHCP Pool End:10.0.15.254

Go to Network then VLAN Setup:

    Click create VLAN

    Check Enable Captive Portal

    Set Maximum Hops Allowed to 1

    Set Parent interface to eth0

    Set VLAN ID/Tag to 22

    Uncheck Dynamic IP Address

    Set Static IP Address to 20.0.0.1

    Set Network Prefix to 20

    Check Use System DNS Server

    Check Enable DHCP Server on this Interface

    Set DHCP Pool Start 20.0.0.10

    Set DHCP Pool End to 20.0.15.254

    Click create VLAN then hard restart the machine

Lets configure the separate network where VLAN ID 22 is the main interface:

Go to network then interface then eth1

    check enable captive portal

    set maximum hops allowed to 1

    uncheck dynamic ip address

    set static to 20.0.0.1

    set network segment to 20

    check Use System DNS Server

    Check Enable DHCP Server on this Interface

    DHCP Pool Start 20.0.0.10

    DHCP Pool End:20.0.15.254

Go to Network then VLAN Setup:

    Click create VLAN

    Check Enable Captive Portal

    Set Maximum Hops Allowed to 1

    Set Parent interface to eth0

    Set VLAN ID/Tag to 22

    Uncheck Dynamic IP Address

    Set Static IP Address to 10.0.0.1

    Set Network Prefix to 20

    Check Use System DNS Server

    Check Enable DHCP Server on this Interface

    Set DHCP Pool Start 10.0.0.10

    Set DHCP Pool End to 10.0.15.254

    Click create VLAN then hard restart the machine

Lets configure the Combined network of VLAN 22(eth0.22) and USB TO LAN(eth1)

Go to network then interface then eth1

    check enable captive portal

    set maximum hops allowed to 1

    uncheck dynamic ip address

    set static to 20.0.0.1

    set network segment to 20

    check Use System DNS Server

    Check Enable DHCP Server on this Interface

    DHCP Pool Start 20.0.0.10

    DHCP Pool End:20.0.15.254

Go to Network then VLAN Setup:

    Click create VLAN

    Check Enable Captive Portal

    Set Maximum Hops Allowed to 1

    Set Parent interface to eth0

    Set VLAN ID/Tag to 22

    Uncheck Dynamic IP Address

    Set Static IP Address to 22.0.0.1

    Set Network Prefix to 20

    Check Use System DNS Server

    Check Enable DHCP Server on this Interface

    Set DHCP Pool Start 22.0.0.10

    Set DHCP Pool End to 22.0.15.254

    Click create VLAN 

Go to Network then Bridge:

    set maximum hops allowed to 1

    check enable captive portal

    Select  Ports/Interface to bridge:

        Check eth1,wlan0,eth0.22

    uncheck dynamic IP address

    set static to 10.0.0.1

    set network segment to 20

    check Use System DNS Server

    Check Enable DHCP Server on this Interface

    DHCP Pool Start 10.0.0.10

    DHCP Pool End:10.0.15.254

     Click create Bridge and hard restart