How To Fixed Machine is Offline and Validation Status...Connecting to server on Adopisoft system

 Solution: Make sure that nameserver 1.1.1.1 and nameserver 8.8.8.8 exist in resolv.conf file such as in the photos

Peparation:
1. search for putty on google chrome browser.Download it and install it.
Putty Here: https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
2. Enable SSH on adopisoft

Steps: 
1. Open putty via ssh then type 10.0.0.1

Use the following login credentials:

For other board:
user:adopisoft

pass:asdf@12345

For RPI
user:pi

pass:raspberry

For OPI5/OPI ONE/OPI PC
user:username: root

passwd: asdf@12345 or asdf@123 or Asdf@12345

For Generic machine/Ubunto server
user:adoadmin

pass:AdoPiSoft

Note: Typing the password will have no display response. Just make sure you type it correctly then ENTER.

2. Type this command on terminal sudo nano /etc/resolv.conf then press ENTER

3. Edit it and add all you interface IP, ISP routers IP/Gateway and the DNS(usually 8.8.8.8 and 1.1.1.1). To edit use arrow up and down, arrow left and right and backspace. Sample below.Just follow the patterrn.

4. After editing press CTRL+O then press ENTER to save.
    Press CTRL+X to exit file.
    Type exit to close putty.

After that check if your problem is fixed.

Yung mga hindi maka intindi  at hindi nagbabasa o nagbabasa pero hindi naman inuunawa, uunahan ko na kayo sa mga tanong na nasa guide naman tulad nito:

"Paano po ii edit boss saan magpipindot" sagot: To edit use arrow up and down, arrow left and right and backspace.
"Anong ilalagay":

Sagot: Depende sa kung anong makikita dashboard mo.Ito ang mga ilalagay Mga Ip ng interface ng VLAN at USB TO LAN. Sample sa picture above are 10.0.0.1, 8.0.0.1, and 20.0.0.1 IP ng main router mo kung saan kumukuha ng internet ang vendo machine/Ubuntu PC.Example 192.168.1.1, 192.168.254.254, 192.168.0.1 Last is IP of your DNS. This is the most important .Kaya wag pong kalimutan. Usually 8.8.8.8 at 1.1.1.1 Take note, depende sa makikita sa dashboard nyo po. Follow the format <nameserver space IP>
"Na edit ko na po, anong sunod?" Sagot: After editing press CTRL+O then press ENTER to save.
            Press CTRL+X to exit file.
            Type exit to close putty.